Rütten Vibromixer™ R1

Rütten vibromixer R1
Vibromixer R1 mounted on a Rütten sterile vessel.
Rütten vibromixer R1
Cross section showing the mixing plate of the vibromixer R1.
Rütten vibromixer R1
Cross section showing the mixing plate of the vibromixer R1.
Advanced vibrating agitator for high value liquids 1to 30 litres (0.25 to 8 US gal).
Logo SSS (Sterile Storage System)  SSterile Storage System (SSS)
Application :
Blending Dispersion Homogenisation Suspension Heat transfer Shear induced particle sizing
Operative range :
Anaerobic vaccines : tetanus, pertussis, diphtheria Insuline Blood plasma

A shaft connected to the vibrator transmits its force to a perforated mixing plate fixed at a shaft end. As the plate vibrates up and down, liquid jets are formed by the conical holes in the mixing plate. The result is a gentle and effective axial mixing.

The vibrating shaft is perfectly sealed with a simple teflon/silicon membrane. There are no rotating parts or mechanical seals in the system that could generate any particles. As all parts with product contact are directly exposed to the product, the system is easy to clean.
Vibromixers are suitable to be used under pressure or vacuum or atmospheric pressure for mixing of low viscosity fluids, suspensions of solids in liquids, gas-liquid mixing and emulsification of immiscible liquids. An additional application is breaking up crystalline structures and obtain a defined particle size.
Units Vibromixer R1
Mixing direction Upflow | Downflow
Stirrer shaft length Application specific
Process connection TC connectors for filling vessels |head plate with additionnal ports DN 150 |DN200
Vibration amplitude 60 Hz (230 V 1 Ph, 2A) mm (in) 0 to 2.0 (0 to 0.08)
Weight kg lbs 4.6 (10)
Operating pressure bar -1 to 2
Material stirrer AISI 316L, ground Ra < 0.3, electropolished
Special alloys upon request
Material sterile sealing unit Reinforced Silicone + PTFE
Material motor housing AISI 304 in hygienic design
Vibromixer R1
Controller types VC-030 VPC-070/080
Mixing direction Upflow | Downflow
Stirrer shaft length Application specific
Process connection TC connectors for filling vessels   |  Head plate with additionnal ports DN 150   |   DN 200
Description Thyristor amplitude controller Full PI-control system with frequency converter and high precision amplitude sensor
Power supply 110-230 V, 6.0 A 230 VAC / Amps
Input frequency 50 / 60 Hz 50 / 60 Hz
Output frequency 50 / 60 Hz 33-66 Hz
Broken sensor cable detection stop
Amplitude selection stop stop
Amplitude measurement and tuning stop
Frequency tuning stop
Alarm output stop
Motor power output stop
Material cabinet Aluminium case Stainless steel case
Dimensions [mm] 120 × 90 × 140 330 × 165 × 275
User interface Potentiometer Full graphic display with keyboard, manual start / stop key
Signals 4…20 mA and Profibus
start / stop / alarm


Benefits over rotating stirrers

  • check_circleEffective axial mixing
  • check_circle300 % more energy efficient
  • check_circleNo mechanical seal, no lubricants
  • check_circleDimensional scale-up
  • check_circleNo particle shedding
  • check_circleStirrer in one piece—Easy to clean

Components

Vibromixer R1 matches with following components :
  • Rütten head plates
    Process scales
    Amplitude controller   Product info ⟩
    Balances   Product info ⟩
  • Rütten magnetic stirrers
    Instruments
    Mixmeter | Diaphragm pressure gauge | Pressure probe | Temperature probe | pH probe